|
|
ACCESSORIES
Floor Cleaning
|
We have a great
selection of surface cleaning Equipment available, from hand held guns to
“lawnmower” type floor-cleaners to truck mounted self contained
assemblies. Please contact us with your specific requirements.
WOMA- Floormaster® - FM
1000-E-24V
Product Sample:
Operating pressure: 1000
bar
Medium temperature: 100ºC
Description:
The Floormaster® is intended for the use as floor cleaning unit which, in
connection with a suction device (vacuum truck), cleans and disposes
simultaneously in a nonpolluting way.
The high temperature resistant (up to 100°C) makes the Floormaster® in
connection with the hot-water WOMA Ecotherm® units
an extremely efficient water tool. |
|
|
 |
Advantages
 When
using a optional suction device, a separate disposal
of the removed contaminants is not necessary.
Height
adjustment for spray bar
Speed
regulation by nozzle adjustment
|
Technical data:
|
|
Part-No.: |
001.1436 |
|
Operating pressure:
|
max. 1000 bar |
|
Medium temperature:
|
max. + 100ºC |
|
Weight: |
appr. 23 kg |
|
Working width: |
ca. 300mm |
|
Speed spray bar:
|
max. 1500 1/min
|
|
No. of nozzles :
|
2 |
|
Recommended nozzles:
|
form 4 round jet
|
|
|
form 19 flat jet
|
|
High pressure connection :
|
aM24x1,5 DK |
|
Control voltage :
|
24V DC |
|
|
|
|
Recommended nozzle
diameters at: |
|
800 bar and 21 l/min |
Part-No. |
| 2 x
0,70mm |
form
4 |
340.0447 |
| 2 x
0,80mm |
form
19 30º |
340.1979 |
|
500 bar and 33 l/min |
|
| 2 x
1,10mm |
form
4 |
340.0428 |
| 2 x
1,00mm |
form
19 30º |
340.1917 |
|
|
|
O-Ring for nozzle |
form
4 and 19 |
340.1917 |
|
Accessories |
Part-No. |
| High
pressure connection aM22x1.5 WGA* |
010.9671 |
*WGA = special hand-screwed connection
|
|
|
|
Product Sample: VACUJET VJ 2500-PN
For pneumatic control
Vacujet
2500-PN
with sealing lip - Part-Nr. 001.1101.3
Vacujet
2500-PN
with brush - Part-Nr. 001.1102.1
Description:
The Vacujet 2500-1-PN is intended for the use as floor cleaning unit
which, in connection with a suction device, cleans and disposes
simultaneously in a nonpolluting way.
Depending on requirement to the ground
sealing the Vacujet can be equipped with a brush or in case of highest
requirements to density with a sealing lip. |
 |
|
Advantages:
|
|
When using a suction device a separate
disposal of suspension risen from cleaning is not necessary
Speed adjustable by air pressure and air
quantity
Parts under pressure made of high-tensile
stainless steel.
Retrofit kit for fan jet nozzle
form 9 (max.
2000 bar) PN 010.7963.1.
Operating information:
The air motor is only to be used with dry, clean and lubricated air. Every
30 operating hours fill up with pneumatic oil WOMA PN 400.0252.9 -
viscosity class ISO VG 32 -. |
|
Technical data
|
|
Operating pressure:
|
max. 2500 bar
|
|
Overall width:
|
appr. 440 mm
|
|
Working width:
|
appr. 225 mm
|
|
Weight: |
appr. 36.0 kg
|
|
Speed Spray bar:
|
max. 2500 rpm
|
|
Air consumption:
|
0.52 m³ / min at 6
bar |
|
Air pressure:
|
max. 7 bar
|
|
No. of nozzles:
|
max. 8 pieces
|
|
Recommended nozzles:
|
form 13* / form 21 |
Operating information:
The air motor is only to be used with dry, clean and lubricated air. Every
30 operating hours fill up with pneumatic oil WOMA PN 400.0252.9 -
viscosity class ISO VG 32 -.
Recommended nozzle diameters:
at 2000 bar and 16 l/min 8 x 0,30 mm form 21 PN
340.2133.7
at 2000 bar and 20 l/min 8 x 0,35 mm form
21 PN
340.2134.5
at 2500 bar and 15 l/min 8 x 0,25 mm form
21 PN
340.2132.9
* When using the nozzle form 13, 8
nozzle holding screws PN 160.3593.3 should be ordered separately.
Edition: 11/98
|
|
| Product
Sample: VACUJET VJ 2500-E
For electric control
Vacujet 2500-E-EXI
with sealing lip - Part-No. 001.1103.9
Vacujet 2500-E-EXI
with brush - Part-No. 001.1104.7
Vacujet 2500-E-24V
with sealing lip - Part-No. 001.1145.0
Vacujet 2500-E-24V
with brush - Part-No. 001.1146.8
Description:
The Vacujet 2500-1-E is intended for the use as floor cleaning unit which,
in connection with a suction device, cleans and disposes simultaneously in
a nonpolluting way.
|
 |
| Depending on requirement to the ground
sealing the Vacujet can be equipped with a brush or in case of highest
requirements to density with a sealing lip. |
|
Advantages:
|
|
When
using a suction device a separate disposal of suspension risen from
cleaning is not necessary
Speed
adjustable by air pressure and air quantity
Parts
under pressure made of high-tensile stainless steel
Retrofit
kit for fan jet nozzle form 9 (max.
2000 bar) PN 010.7963.1. |
|
Technical data:
|
|
Operating pressure:
|
max. 2500 bar
|
|
Overall width:
|
appr. 440 mm
|
|
Working width:
|
appr. 225 mm
|
|
Weight: |
appr. 36.0 kg
|
|
Speed Spray bar:
|
max. 2500 rpm
|
|
Air consumption:
|
0.52 m³ / min at 6
bar |
|
Air pressure:
|
max. 7 bar
|
|
No. of nozzles:
|
max. 8 pieces
|
|
Recommended nozzles:
|
form 13* / form 21 |
| Operating information:
The air motor is only to be used with dry, clean and lubricated air. Every
30 operating hours fill up with pneumatic oil WOMA PN 400.0252.9 -
viscosity class ISO VG 32 -.
Recommended nozzle diameters:
at 2000 bar and 16 l/min 8 x 0,30 mm form 21 PN
340.2133.7
at 2000 bar and 20 l/min 8 x 0,35 mm
form 21 PN
340.2134.5
at 2500 bar and 15 l/min 8 x 0,25 mm
form 21 PN
340.2132.9
*) When using the nozzle form
13, 8
nozzle holding screws PN 160.3593.3 should be ordered separately.
Edition: 11/98
|
|
|
|
Back to top
|
"If it relates to high-pressure water, we have
most likely done it."
- Bill France, President
Contact us for Specialty Brochures or consultation
 |
aquapower ® is a registered trademark of
aquachem corporation.
aquachem Corp. and aquapower ® make no claims for the correctness of
any information displayed as continues engineering improvement may
change specifications, data and availability of equipment shown on
our website.
© 2002 by aquachem |
|
|
